MODELL
INFORMATION
ART. NR.
NITROUS
OXIDE KITS
With our dyno-tuned nitrous oxide kits you get proven results (quicker ET, higher
mph) without giving up reliability. Each kit is jetted (fuel-nitrous oxide) for
your application. Engine displacement, compressions ratio, carburetion and exhaust
system specifications are taken into account and your kit is jetted accordingly.
Additional tuning specifications are included, i.e., ignition timing, cam timing,
overall gear ratio, etc. Kit includes 2 lb, 1 lb or 10 oz. nitrous bottle, electrical
fuel pump, bottle mounting bracket, high-flow fuel and nitrous solenoids, precision
machined mixed type nozzles, stainless steel nitrous line and all plumbing and
electrical fittings that are necessary for installation. With instructions and
schematics.
MODELL
INFORMATION
ART. NR.
For optimum weight reduction and distinctive high-tech look, these DOT-approved NOS carbon fiber-wrapped bottles are tne only way to go. The carbon bottles weigh half as much as standard bottles. 1.6 lb capacity.
MODELL
INFORMATION
ART. NR.
For consistent runs in cold weather, it is important to maintain bottle pressure at or near 900 psi, which occurs at about 80°F. Since bottle pressure will drop as temperature drops, a very rich fuel condition can create inconsistency in your runs. The NOS Bottle Heater module is thermostatically operated and a very cost-effective way to cure this potential problem should you be caught in cold climates. The super-thin heater module simply wraps around the bottle and will maintain a 75°F bottle temperature, even if ambient temperatures drop below 0°F! The heating element is completely fuse-protected and controlled by a thermostat which auto-cycles its operation.
MODELL
INFORMATION
ART. NR.
Features two independent stages of nitrous controll - each with its own throttle position activation switch and progressive ramps. RPM on/off control eliminates the need for a window switch and allows you to turn the nitrous off and on at set points. Also features two programmable outputs. You can control timing retard or other devices. Hand-held programmer makes adjustments simple; allows you to mount the main box out of site.
MODELL
INFORMATION
ART. NR.
Fits on top of your nitrous bottle (NX, NOS or Carolina). Required at Bonneville and ECTA for those top end runs. Allen wrench included.
MODELL
INFORMATION
ART. NR.
All the popular bottles in all the popular sizes. We offer polished bottles too.
MODELL
INFORMATION
ART. NR.
LED colors available for Ntimidator purge kits.
Sold separately from purge kit.
NOS 16039-YNOS
MODELL
INFORMATION
ART. NR.
The primary purpose of a purge valve is to release trapped air or gaseous nitrous from feed lines. Helps to ensure consistent performances. Looks cool too! Includes all required components.
MODELL
INFORMATION
ART. NR.
NX has the safest, most reliable nitrous system available for your power sport machine. Whether you want just a little help for your snow machine, jet ski, go-ped, go-kart, pocket bike, dirt bike, four wheeler, pit bike, Bonneville rocket or you want to set a national record and win a drag racing world championship, NX is the system for pros use. Standard kits include stainless steel nozzle lines. For tight nozzle installations, we suggest E-Z flex lines to ease fitment.
(with fuel pump)
(with fuel pump)
(with fuel pump)
(with fuel pump)
1.4 lb/2 ft (with fuel pump)
(with fuel pump). E-Z flex hoses & fittings.
MODELL
INFORMATION
ART. NR.
The NX digital progressive nitrous controller was designed as a simple and cost effective means of allowing the aggressive use of nitrous power and putting it on the ground. The start percentage can be adjusted from 20% to 50% in 2% increments. Build time can be adjusted from 0
(instant 100%) to 8.0 seconds in 0.5 second increments.
MODELL
INFORMATION
ART. NR.
For all factory electronically fuel injected powersports vehicle. Compact, lightweight and an easy way to plug in that extra horsepower. Flip the switch and push the button.
MODELL
INFORMATION
ART. NR.
These solenoids have color-anodized and laser-marked aluminium bodies. Topped with carbon fiber cans for the ultimate in weight savings. Each has a purge or bypass port built in and a bottom exit for flow unmatched by any other solenoid on the market.
MODELL
INFORMATION
ART. NR.
For late model fuel-injected sportbikes. Kits include all parts for simplified, easy installation.
MODELL
INFORMATION
ART. NR.
An excellent accessory for maximizing and tuning your nitrous system. Fuel pressure can be regulated from 0-12 psi with a simple turn of the built-in screw adjuster. Also features a boost-compensating port for blow-through supercharger or turbo applications.
MODELL
INFORMATION
ART. NR.
Designed to maintain equal flow to all nozzles. Available for 1/16" or 1/8" fittings.
MODELL
INFORMATION
ART. NR.
Pre-fabricated nitrous kit simplifies installation. Safely allows up to 40 hp gains on stock engine. Bottles sold separately.
MODELL
INFORMATION
ART. NR.
The only way to properly meter the N2O/fuel ratio is to always have constant bottle pressure. This gauge allows the bottle pressure to be observed at any time. We use and recommend glycerin-filled gauges for their durability and accuracy.
MODELL
INFORMATION
ART. NR.
Micro-polished, billet 6061 aluminium bottle mount with easy spin knob. Provides positive, secure clamping. Flat mount surface or optional bar mount available in a variety of sizes.
MODELL
INFORMATION
ART. NR.
This quick turn Magura throttle has been modified for use with nitrous oxide kits. A spring loaded momentary switch is installed in the throttle assembly which allows nitrous oxide to be triggered without pushing a button. Just twist the throttle and hold on! Switch activation is adjustable and available in normally open and normally closed types.
MODELL
INFORMATION
ART. NR.
Keep your bottle pressure consistent run after run. No more torches or ice bags - your bottle will maintain pressure. Adjustable from 500 to 1100 psi.